=>> Building cad/stepcode build started at Fri Apr 12 01:13:20 UTC 2019 port directory: /usr/ports/cad/stepcode package name: stepcode-0.8_5 building for: FreeBSD ppcports 13.0-CURRENT FreeBSD 13.0-CURRENT 1300013 powerpc maintained by: fernape@FreeBSD.org Makefile ident: $FreeBSD: head/cad/stepcode/Makefile 488341 2018-12-25 20:25:39Z tcberner $ Poudriere version: 3.2.8 Host OSVERSION: 1300012 Jail OSVERSION: 1300013 Job Id: 48 !!! Jail is newer than host. (Jail: 1300013, Host: 1300012) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- SHELL=/bin/csh OSVERSION=1300013 UNAME_v=FreeBSD 13.0-CURRENT 1300013 UNAME_r=13.0-CURRENT BLOCKSIZE=K MAIL=/var/mail/root STATUS=1 HOME=/root PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin LOCALBASE=/usr/local USER=root TRYBROKEN=yes LIBEXECPREFIX=/usr/local/libexec/poudriere POUDRIERE_VERSION=3.2.8 MASTERMNT=/zfs/poudriere/data/.m/head-head-powerpc64-default/ref POUDRIERE_BUILD_TYPE=bulk PACKAGE_BUILDING=yes SAVED_TERM=screen GID=0 UID=0 PWD=/zfs/poudriere/data/.m/head-head-powerpc64-default/ref/.p/pool P_PORTS_FEATURES=FLAVORS SELECTED_OPTIONS MASTERNAME=head-head-powerpc64-default SCRIPTPREFIX=/usr/local/share/poudriere OLDPWD=/zfs/poudriere/data/.m/head-head-powerpc64-default/ref/.p SCRIPTPATH=/usr/local/share/poudriere/bulk.sh POUDRIEREPATH=/usr/local/bin/poudriere ---End Environment--- ---Begin Poudriere Port Flags/Env--- PORT_FLAGS= PKGENV= FLAVOR= DEPENDS_ARGS= MAKE_ARGS= ---End Poudriere Port Flags/Env--- ---Begin OPTIONS List--- ---End OPTIONS List--- --MAINTAINER-- fernape@FreeBSD.org --End MAINTAINER-- --CONFIGURE_ARGS-- --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- XDG_DATA_HOME=/wrkdirs/usr/ports/cad/stepcode/work XDG_CONFIG_HOME=/wrkdirs/usr/ports/cad/stepcode/work HOME=/wrkdirs/usr/ports/cad/stepcode/work TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/cad/stepcode/work/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin SHELL=/bin/sh CONFIG_SHELL=/bin/sh --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/usr/ports/cad/stepcode/work XDG_CONFIG_HOME=/wrkdirs/usr/ports/cad/stepcode/work HOME=/wrkdirs/usr/ports/cad/stepcode/work TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/cad/stepcode/work/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES ADDR2LINE="/usr/local/bin/addr2line" AR="/usr/local/bin/ar" AS="/usr/local/bin/as" CPPFILT="/usr/local/bin/c++filt" GPROF="/usr/local/bin/gprof" LD="/usr/local/bin/ld" NM="/usr/local/bin/nm" OBJCOPY="/usr/local/bin/objcopy" OBJDUMP="/usr/local/bin/objdump" RANLIB="/usr/local/bin/ranlib" READELF="/usr/local/bin/readelf" SIZE="/usr/local/bin/size" STRINGS="/usr/local/bin/strings" DESTDIR=/wrkdirs/usr/ports/cad/stepcode/work/stage PREFIX=/usr/local LOCALBASE=/usr/local CC="gcc8" CFLAGS="-O2 -pipe -Wl,-rpath=/usr/local/lib/gcc8 -fno-strict-aliasing " CPP="cpp8" CPPFLAGS="" LDFLAGS=" -Wl,-rpath=/usr/local/lib/gcc8 -L/usr/local/lib/gcc8 " LIBS="" CXX="g++8" CXXFLAGS="-O2 -pipe -Wl,-rpath=/usr/local/lib/gcc8 -Wl,-rpath=/usr/local/lib/gcc8 " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- CMAKE_BUILD_TYPE="release" OSREL=13.0 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib DOCSDIR="share/doc/stepcode" EXAMPLESDIR="share/examples/stepcode" DATADIR="share/stepcode" WWWDIR="www/stepcode" ETCDIR="etc/stepcode" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/stepcode DOCSDIR=/usr/local/share/doc/stepcode EXAMPLESDIR=/usr/local/share/examples/stepcode WWWDIR=/usr/local/www/stepcode ETCDIR=/usr/local/etc/stepcode --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles FORCE_PACKAGE=yes PACKAGE_BUILDING=yes PACKAGE_BUILDING_FLAVORS=yes #### /usr/ports/Mk/Scripts/ports_env.sh #### _CCVERSION_921dbbb2=cc (GCC) 4.2.1 20070831 patched [FreeBSD] Copyright (C) 2007 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. _ALTCCVERSION_921dbbb2=none _CXXINTERNAL_acaad9ca=Using built-in specs. Target: powerpc64-undermydesk-freebsd Configured with: FreeBSD/powerpc64 system compiler Thread model: posix gcc version 4.2.1 20070831 patched [FreeBSD] "/usr/bin/ld" "--eh-frame-hdr" "-Qy" "-melf64ppc_fbsd" "--enable-new-dtags" "-dynamic-linker" "/libexec/ld-elf.so.1" "/usr/lib/crt1.o" "/usr/lib/crti.o" "/usr/lib/crtbegin.o" "-L/usr/lib" "-L/usr/lib" "/dev/null" "-lstdc++" "-lm" "-lgcc_s" "-lgcc" "-lc" "-lgcc_s" "-lgcc" "/usr/lib/crtsavres.o" "/usr/lib/crtend.o" "/usr/lib/crtn.o" CC_OUTPUT_921dbbb2_58173849=yes CC_OUTPUT_921dbbb2_9bdba57c=yes CC_OUTPUT_921dbbb2_6a4fe7f5=cc1: error: unrecognized command line option "-std=c11" CC_OUTPUT_921dbbb2_6bcac02b=yes CC_OUTPUT_921dbbb2_67d20829=yes CC_OUTPUT_921dbbb2_bfa62e83=cc1: error: unrecognized command line option "-std=gnu11" CC_OUTPUT_921dbbb2_f0b4d593=yes CC_OUTPUT_921dbbb2_308abb44=cc1plus: error: unrecognized command line option "-std=c++0x" CC_OUTPUT_921dbbb2_f00456e5=cc1plus: error: unrecognized command line option "-std=c++11" CC_OUTPUT_921dbbb2_65ad290d=cc1plus: error: unrecognized command line option "-std=c++14" CC_OUTPUT_921dbbb2_f2776b26=cc1plus: error: unrecognized command line option "-std=c++17" CC_OUTPUT_921dbbb2_b2657cc3=yes CC_OUTPUT_921dbbb2_380987f7=cc1plus: error: unrecognized command line option "-std=gnu++11" CC_OUTPUT_921dbbb2_160933ec=cc1plus: error: unrecognized command line option "-std=gnu++14" CC_OUTPUT_921dbbb2_fb62803b=cc1plus: error: unrecognized command line option "-std=gnu++17" _OBJC_CCVERSION_921dbbb2=cc (GCC) 4.2.1 20070831 patched [FreeBSD] Copyright (C) 2007 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. _OBJC_ALTCCVERSION_921dbbb2=none ARCH=powerpc64 OPSYS=FreeBSD _OSRELEASE=13.0-CURRENT OSREL=13.0 OSVERSION=1300013 PYTHONBASE=/usr/local _SMP_CPUS=80 CONFIGURE_MAX_CMD_LEN=262144 HAVE_PORTS_ENV=1 #### Misc Poudriere #### DISABLE_MAKE_JOBS=poudriere ---End make.conf--- --Resource limits-- cpu time (seconds, -t) unlimited file size (512-blocks, -f) unlimited data seg size (kbytes, -d) 33554432 stack size (kbytes, -s) 524288 core file size (512-blocks, -c) unlimited max memory size (kbytes, -m) unlimited locked memory (kbytes, -l) unlimited max user processes (-u) 89999 open files (-n) 1024 virtual mem size (kbytes, -v) unlimited swap limit (kbytes, -w) unlimited socket buffer size (bytes, -b) unlimited pseudo-terminals (-p) unlimited kqueues (-k) unlimited umtx shared locks (-o) unlimited --End resource limits-- =================================================== ===> License BSD3CLAUSE accepted by the user =========================================================================== =================================================== ===> stepcode-0.8_5 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.10.5_5.txz [ppcports] Installing pkg-1.10.5_5... [ppcports] Extracting pkg-1.10.5_5: .......... done ===> stepcode-0.8_5 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of stepcode-0.8_5 =========================================================================== =================================================== =========================================================================== =================================================== ===> License BSD3CLAUSE accepted by the user ===> Fetching all distfiles required by stepcode-0.8_5 for building =========================================================================== =================================================== ===> License BSD3CLAUSE accepted by the user ===> Fetching all distfiles required by stepcode-0.8_5 for building => SHA256 Checksum OK for stepcode-stepcode-v0.8_GH0.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> License BSD3CLAUSE accepted by the user ===> Fetching all distfiles required by stepcode-0.8_5 for building ===> Extracting for stepcode-0.8_5 => SHA256 Checksum OK for stepcode-stepcode-v0.8_GH0.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for stepcode-0.8_5 ===> Applying FreeBSD patches for stepcode-0.8_5 =========================================================================== =================================================== ===> stepcode-0.8_5 depends on file: /usr/local/bin/cmake - not found ===> Installing existing package /packages/All/cmake-3.14.1.txz [ppcports] Installing cmake-3.14.1... [ppcports] `-- Installing curl-7.64.1_1... [ppcports] | `-- Installing ca_root_nss-3.43... [ppcports] | `-- Extracting ca_root_nss-3.43: ........ done [ppcports] | `-- Installing libnghttp2-1.37.0... [ppcports] | | `-- Installing gcc8-8.3.0_1... [ppcports] | | `-- Installing binutils-2.32,1... [ppcports] | | | `-- Installing gettext-runtime-0.19.8.1_2... [ppcports] | | | `-- Installing indexinfo-0.3.1... [ppcports] | | | `-- Extracting indexinfo-0.3.1: .... done [ppcports] | | | `-- Extracting gettext-runtime-0.19.8.1_2: .......... done [ppcports] | | `-- Extracting binutils-2.32,1: .....make: Working in: /usr/ports/cad/stepcode ...make: Working in: /usr/ports/cad/stepcode .. done [ppcports] | | `-- Installing gmp-6.1.2_1... [ppcports] | | `-- Extracting gmp-6.1.2_1: .......... done [ppcports] | | `-- Installing mpc-1.1.0_2... [ppcports] | | | `-- Installing mpfr-4.0.2... [ppcports] | | | `-- Extracting mpfr-4.0.2: .......... done [ppcports] | | `-- Extracting mpc-1.1.0_2: ......... done [ppcports] | | `-- Extracting gcc8-8.3.0_1: ......make: Working in: /usr/ports/cad/stepcode ...make: Working in: /usr/ports/cad/stepcode . done [ppcports] | `-- Extracting libnghttp2-1.37.0: .......... done [ppcports] `-- Extracting curl-7.64.1_1: .......... done [ppcports] `-- Installing expat-2.2.6_1... [ppcports] `-- Extracting expat-2.2.6_1: .......... done [ppcports] `-- Installing jsoncpp-1.8.1_6... [ppcports] `-- Extracting jsoncpp-1.8.1_6: .......... done [ppcports] `-- Installing libarchive-3.3.3,1... [ppcports] | `-- Installing liblz4-1.8.3,1... [ppcports] | `-- Extracting liblz4-1.8.3,1: .......... done [ppcports] | `-- Installing lzo2-2.10_1... [ppcports] | `-- Extracting lzo2-2.10_1: .......... done [ppcports] `-- Extracting libarchive-3.3.3,1: .......... done [ppcports] `-- Installing libuv-1.27.0... [ppcports] `-- Extracting libuv-1.27.0: .......... done [ppcports] `-- Installing rhash-1.3.5... [ppcports] `-- Extracting rhash-1.3.5: .......... done [ppcports] Extracting cmake-3.14.1: .......... done Message from ca_root_nss-3.43: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Message from gcc8-8.3.0_1: To ensure binaries built with this toolchain find appropriate versions of the necessary run-time libraries, you may want to link using -Wl,-rpath=/usr/local/lib/gcc8 For ports leveraging USE_GCC, USES=compiler, or USES=fortran this happens transparently. ===> stepcode-0.8_5 depends on file: /usr/local/bin/cmake - found ===> Returning to build of stepcode-0.8_5 ===> stepcode-0.8_5 depends on executable: ninja - not found ===> Installing existing package /packages/All/ninja-1.8.2_1,2.txz [ppcports] Installing ninja-1.8.2_1,2... [ppcports] `-- Installing python27-2.7.16... [ppcports] | `-- Installing libffi-3.2.1_3... [ppcports] | `-- Extracting libffi-3.2.1_3: .......... done [ppcports] | `-- Installing readline-7.0.5... [ppcports] | `-- Extracting readline-7.0.5: .......... done [ppcports] `-- Extracting python27-2.7.16: .....make: Working in: /usr/ports/cad/stepcode ..... done [ppcports] Extracting ninja-1.8.2_1,2: ......... done Message from python27-2.7.16: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== ===> stepcode-0.8_5 depends on executable: ninja - found ===> Returning to build of stepcode-0.8_5 ===> stepcode-0.8_5 depends on executable: gcc8 - found ===> stepcode-0.8_5 depends on file: /usr/local/bin/as - found =========================================================================== =================================================== =========================================================================== =================================================== ===> Configuring for stepcode-0.8_5 ===> Performing out-of-source build /bin/mkdir -p /wrkdirs/usr/ports/cad/stepcode/work/.build make: Working in: /usr/ports/cad/stepcode -- The C compiler identification is GNU 8.3.0 -- The CXX compiler identification is GNU 8.3.0 -- Check for working C compiler: /usr/local/bin/gcc8 -- Check for working C compiler: /usr/local/bin/gcc8 -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Detecting C compile features -- Detecting C compile features - done -- Check for working CXX compiler: /usr/local/bin/g++8 -- Check for working CXX compiler: /usr/local/bin/g++8 -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Detecting CXX compile features -- Detecting CXX compile features - done CMake Deprecation Warning at CMakeLists.txt:58 (CMAKE_POLICY): The OLD behavior for policy CMP0026 will be removed from a future version of CMake. The cmake-policies(7) manual explains that the OLD behaviors of all policies are deprecated and that a policy should be set to OLD only under specific short-term circumstances. Projects should be ported to the NEW behavior and not rely on setting a policy to OLD. CMake Warning (dev) at cmake/SC_Build_opts.cmake:30 (option): Policy CMP0077 is not set: option() honors normal variables. Run "cmake --help-policy CMP0077" for policy details. Use the cmake_policy command to set the policy and suppress this warning. For compatibility with older versions of CMake, option is clearing the normal variable 'SC_BUILD_SHARED_LIBS'. Call Stack (most recent call first): cmake/SC_Build_opts.cmake:34 (OPTION_WITH_DEFAULT) CMakeLists.txt:72 (include) This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at cmake/SC_Build_opts.cmake:30 (option): Policy CMP0077 is not set: option() honors normal variables. Run "cmake --help-policy CMP0077" for policy details. Use the cmake_policy command to set the policy and suppress this warning. For compatibility with older versions of CMake, option is clearing the normal variable 'SC_BUILD_STATIC_LIBS'. Call Stack (most recent call first): cmake/SC_Build_opts.cmake:37 (OPTION_WITH_DEFAULT) CMakeLists.txt:72 (include) This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at cmake/SC_Build_opts.cmake:30 (option): Policy CMP0077 is not set: option() honors normal variables. Run "cmake --help-policy CMP0077" for policy details. Use the cmake_policy command to set the policy and suppress this warning. For compatibility with older versions of CMake, option is clearing the normal variable 'SC_PYTHON_GENERATOR'. Call Stack (most recent call first): cmake/SC_Build_opts.cmake:39 (OPTION_WITH_DEFAULT) CMakeLists.txt:72 (include) This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at cmake/SC_Build_opts.cmake:30 (option): Policy CMP0077 is not set: option() honors normal variables. Run "cmake --help-policy CMP0077" for policy details. Use the cmake_policy command to set the policy and suppress this warning. For compatibility with older versions of CMake, option is clearing the normal variable 'SC_CPP_GENERATOR'. Call Stack (most recent call first): cmake/SC_Build_opts.cmake:40 (OPTION_WITH_DEFAULT) CMakeLists.txt:72 (include) This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at cmake/SC_Build_opts.cmake:30 (option): Policy CMP0077 is not set: option() honors normal variables. Run "cmake --help-policy CMP0077" for policy details. Use the cmake_policy command to set the policy and suppress this warning. For compatibility with older versions of CMake, option is clearing the normal variable 'SC_MEMMGR_ENABLE_CHECKS'. Call Stack (most recent call first): cmake/SC_Build_opts.cmake:42 (OPTION_WITH_DEFAULT) CMakeLists.txt:72 (include) This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at cmake/SC_Build_opts.cmake:30 (option): Policy CMP0077 is not set: option() honors normal variables. Run "cmake --help-policy CMP0077" for policy details. Use the cmake_policy command to set the policy and suppress this warning. For compatibility with older versions of CMake, option is clearing the normal variable 'SC_TRACE_FPRINTF'. Call Stack (most recent call first): cmake/SC_Build_opts.cmake:43 (OPTION_WITH_DEFAULT) CMakeLists.txt:72 (include) This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at cmake/SC_Build_opts.cmake:30 (option): Policy CMP0077 is not set: option() honors normal variables. Run "cmake --help-policy CMP0077" for policy details. Use the cmake_policy command to set the policy and suppress this warning. For compatibility with older versions of CMake, option is clearing the normal variable 'SC_ENABLE_COVERAGE'. Call Stack (most recent call first): cmake/SC_Build_opts.cmake:50 (OPTION_WITH_DEFAULT) CMakeLists.txt:72 (include) This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at cmake/SC_Build_opts.cmake:30 (option): Policy CMP0077 is not set: option() honors normal variables. Run "cmake --help-policy CMP0077" for policy details. Use the cmake_policy command to set the policy and suppress this warning. For compatibility with older versions of CMake, option is clearing the normal variable 'SC_ENABLE_TESTING'. Call Stack (most recent call first): cmake/SC_Build_opts.cmake:65 (OPTION_WITH_DEFAULT) CMakeLists.txt:72 (include) This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at CMakeLists.txt:95 (set): implicitly converting 'string' to 'STRING' type. This warning is for project developers. Use -Wno-dev to suppress it. -- Looking for ndir.h -- Looking for ndir.h - not found -- Looking for stdarg.h -- Looking for stdarg.h - found -- Looking for sys/stat.h -- Looking for sys/stat.h - found -- Looking for sys/param.h -- Looking for sys/param.h - found -- Looking for sysent.h -- Looking for sysent.h - not found -- Looking for unistd.h -- Looking for unistd.h - found -- Looking for dirent.h -- Looking for dirent.h - found -- Looking for stdbool.h -- Looking for stdbool.h - found -- Looking for process.h -- Looking for process.h - not found -- Looking for io.h -- Looking for io.h - not found -- Looking for abs -- Looking for abs - found -- Looking for memcpy -- Looking for memcpy - found -- Looking for memmove -- Looking for memmove - found -- Looking for getopt -- Looking for getopt - found -- Looking for sys/types.h -- Looking for sys/types.h - found -- Looking for stdint.h -- Looking for stdint.h - found -- Looking for stddef.h -- Looking for stddef.h - found -- Check size of ssize_t -- Check size of ssize_t - done -- Performing Test HAVE_STD_THREAD -- Performing Test HAVE_STD_THREAD - Success .. Assuming compiler is capable of unity build. .. Override by setting SC_UNITY_BUILD; TRUE will result in *huge* translation units, higher memory use in compilation, and faster build times. -- Compiling schema scanner... CMake Error at cmake/schema_scanner/schemaScanner.cmake:62 (message): Scanner config status: Process terminated due to timeout. stdout: loading initial cache file /wrkdirs/usr/ports/cad/stepcode/work/.build/schema_scanner/initial_scanner_cache.cmake -- The C compiler identification is GNU 8.3.0 -- The CXX compiler identification is GNU 8.3.0 -- Check for working C compiler: /usr/local/bin/gcc8 -- Check for working C compiler: /usr/local/bin/gcc8 -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Detecting C compile features stderr: Call Stack (most recent call first): data/CMakeLists.txt:14 (include) -- Configuring incomplete, errors occurred! See also "/wrkdirs/usr/ports/cad/stepcode/work/.build/CMakeFiles/CMakeOutput.log". See also "/wrkdirs/usr/ports/cad/stepcode/work/.build/CMakeFiles/CMakeError.log". *** Error code 1 Stop. make: stopped in /usr/ports/cad/stepcode =>> Cleaning up wrkdir ===> Cleaning for stepcode-0.8_5 build of cad/stepcode | stepcode-0.8_5 ended at Fri Apr 12 01:48:54 UTC 2019 build time: 00:35:36 !!! build failure encountered !!!