=>> Building www/mod_authnz_crowd build started at Fri Apr 12 03:10:40 UTC 2019 port directory: /usr/ports/www/mod_authnz_crowd package name: mod_authnz_crowd-2.2.2_10 building for: FreeBSD ppcports 13.0-CURRENT FreeBSD 13.0-CURRENT 1300013 powerpc maintained by: vivek@khera.org Makefile ident: $FreeBSD: head/www/mod_authnz_crowd/Makefile 487272 2018-12-12 01:35:33Z gerald $ Poudriere version: 3.2.8 Host OSVERSION: 1300012 Jail OSVERSION: 1300013 Job Id: 04 !!! Jail is newer than host. (Jail: 1300013, Host: 1300012) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- SHELL=/bin/csh OSVERSION=1300013 UNAME_v=FreeBSD 13.0-CURRENT 1300013 UNAME_r=13.0-CURRENT BLOCKSIZE=K MAIL=/var/mail/root STATUS=1 HOME=/root PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin LOCALBASE=/usr/local USER=root TRYBROKEN=yes LIBEXECPREFIX=/usr/local/libexec/poudriere POUDRIERE_VERSION=3.2.8 MASTERMNT=/zfs/poudriere/data/.m/head-head-powerpc64-default/ref POUDRIERE_BUILD_TYPE=bulk PACKAGE_BUILDING=yes SAVED_TERM=screen GID=0 UID=0 PWD=/zfs/poudriere/data/.m/head-head-powerpc64-default/ref/.p/pool P_PORTS_FEATURES=FLAVORS SELECTED_OPTIONS MASTERNAME=head-head-powerpc64-default SCRIPTPREFIX=/usr/local/share/poudriere OLDPWD=/zfs/poudriere/data/.m/head-head-powerpc64-default/ref/.p SCRIPTPATH=/usr/local/share/poudriere/bulk.sh POUDRIEREPATH=/usr/local/bin/poudriere ---End Environment--- ---Begin Poudriere Port Flags/Env--- PORT_FLAGS= PKGENV= FLAVOR= DEPENDS_ARGS= MAKE_ARGS= ---End Poudriere Port Flags/Env--- ---Begin OPTIONS List--- ---End OPTIONS List--- --MAINTAINER-- vivek@khera.org --End MAINTAINER-- --CONFIGURE_ARGS-- --prefix=/usr/local ${_LATE_CONFIGURE_ARGS} --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- XDG_DATA_HOME=/wrkdirs/usr/ports/www/mod_authnz_crowd/work XDG_CONFIG_HOME=/wrkdirs/usr/ports/www/mod_authnz_crowd/work HOME=/wrkdirs/usr/ports/www/mod_authnz_crowd/work TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/www/mod_authnz_crowd/work/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin SHELL=/bin/sh CONFIG_SHELL=/bin/sh LANG=en_US.UTF-8 LC_ALL=en_US.UTF-8 CONFIG_SITE=/usr/ports/Templates/config.site lt_cv_sys_max_cmd_len=262144 --End CONFIGURE_ENV-- --MAKE_ENV-- XDG_DATA_HOME=/wrkdirs/usr/ports/www/mod_authnz_crowd/work XDG_CONFIG_HOME=/wrkdirs/usr/ports/www/mod_authnz_crowd/work HOME=/wrkdirs/usr/ports/www/mod_authnz_crowd/work TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/www/mod_authnz_crowd/work/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES LANG=en_US.UTF-8 LC_ALL=en_US.UTF-8 PREFIX=/usr/local LOCALBASE=/usr/local CC="gcc" CFLAGS="-O2 -pipe -fno-strict-aliasing " CPP="gcpp" CPPFLAGS="" LDFLAGS=" " LIBS="-L/usr/local/lib" CXX="g++" CXXFLAGS="-O2 -pipe " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- APACHEMODDIR="libexec/apache24" APACHEINCLUDEDIR="include/apache24" APACHEETCDIR="etc/apache24" APACHE_VERSION="2.4" AP_NAME="authnz_crowd" AP_MODULE="mod_authnz_crowd.so" GTK2_VERSION="2.10.0" GTK3_VERSION="3.0.0" OSREL=13.0 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib AP_MOD_EN="-A" DOCSDIR="share/doc/mod_authnz_crowd" EXAMPLESDIR="share/examples/mod_authnz_crowd" DATADIR="share/mod_authnz_crowd" WWWDIR="www/mod_authnz_crowd" ETCDIR="etc/mod_authnz_crowd" --End PLIST_SUB-- --SUB_LIST-- APACHEETCDIR=etc/apache24 APACHEMODDIR=libexec/apache24 AP_MODULE=mod_authnz_crowd APACHEMODDIR="libexec/apache24" APACHEETCDIR="etc/apache24" APACHE_VERSION="2.4" PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/mod_authnz_crowd DOCSDIR=/usr/local/share/doc/mod_authnz_crowd EXAMPLESDIR=/usr/local/share/examples/mod_authnz_crowd WWWDIR=/usr/local/www/mod_authnz_crowd ETCDIR=/usr/local/etc/mod_authnz_crowd --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles FORCE_PACKAGE=yes PACKAGE_BUILDING=yes PACKAGE_BUILDING_FLAVORS=yes #### /usr/ports/Mk/Scripts/ports_env.sh #### _CCVERSION_921dbbb2=cc (GCC) 4.2.1 20070831 patched [FreeBSD] Copyright (C) 2007 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. _ALTCCVERSION_921dbbb2=none _CXXINTERNAL_acaad9ca=Using built-in specs. Target: powerpc64-undermydesk-freebsd Configured with: FreeBSD/powerpc64 system compiler Thread model: posix gcc version 4.2.1 20070831 patched [FreeBSD] "/usr/bin/ld" "--eh-frame-hdr" "-Qy" "-melf64ppc_fbsd" "--enable-new-dtags" "-dynamic-linker" "/libexec/ld-elf.so.1" "/usr/lib/crt1.o" "/usr/lib/crti.o" "/usr/lib/crtbegin.o" "-L/usr/lib" "-L/usr/lib" "/dev/null" "-lstdc++" "-lm" "-lgcc_s" "-lgcc" "-lc" "-lgcc_s" "-lgcc" "/usr/lib/crtsavres.o" "/usr/lib/crtend.o" "/usr/lib/crtn.o" CC_OUTPUT_921dbbb2_58173849=yes CC_OUTPUT_921dbbb2_9bdba57c=yes CC_OUTPUT_921dbbb2_6a4fe7f5=cc1: error: unrecognized command line option "-std=c11" CC_OUTPUT_921dbbb2_6bcac02b=yes CC_OUTPUT_921dbbb2_67d20829=yes CC_OUTPUT_921dbbb2_bfa62e83=cc1: error: unrecognized command line option "-std=gnu11" CC_OUTPUT_921dbbb2_f0b4d593=yes CC_OUTPUT_921dbbb2_308abb44=cc1plus: error: unrecognized command line option "-std=c++0x" CC_OUTPUT_921dbbb2_f00456e5=cc1plus: error: unrecognized command line option "-std=c++11" CC_OUTPUT_921dbbb2_65ad290d=cc1plus: error: unrecognized command line option "-std=c++14" CC_OUTPUT_921dbbb2_f2776b26=cc1plus: error: unrecognized command line option "-std=c++17" CC_OUTPUT_921dbbb2_b2657cc3=yes CC_OUTPUT_921dbbb2_380987f7=cc1plus: error: unrecognized command line option "-std=gnu++11" CC_OUTPUT_921dbbb2_160933ec=cc1plus: error: unrecognized command line option "-std=gnu++14" CC_OUTPUT_921dbbb2_fb62803b=cc1plus: error: unrecognized command line option "-std=gnu++17" _OBJC_CCVERSION_921dbbb2=cc (GCC) 4.2.1 20070831 patched [FreeBSD] Copyright (C) 2007 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. _OBJC_ALTCCVERSION_921dbbb2=none ARCH=powerpc64 OPSYS=FreeBSD _OSRELEASE=13.0-CURRENT OSREL=13.0 OSVERSION=1300013 PYTHONBASE=/usr/local _SMP_CPUS=80 CONFIGURE_MAX_CMD_LEN=262144 HAVE_PORTS_ENV=1 #### Misc Poudriere #### DISABLE_MAKE_JOBS=poudriere ---End make.conf--- --Resource limits-- cpu time (seconds, -t) unlimited file size (512-blocks, -f) unlimited data seg size (kbytes, -d) 33554432 stack size (kbytes, -s) 524288 core file size (512-blocks, -c) unlimited max memory size (kbytes, -m) unlimited locked memory (kbytes, -l) unlimited max user processes (-u) 89999 open files (-n) 1024 virtual mem size (kbytes, -v) unlimited swap limit (kbytes, -w) unlimited socket buffer size (bytes, -b) unlimited pseudo-terminals (-p) unlimited kqueues (-k) unlimited umtx shared locks (-o) unlimited --End resource limits-- =================================================== ===> License APACHE20 accepted by the user =========================================================================== =================================================== ===> mod_authnz_crowd-2.2.2_10 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.10.5_5.txz [ppcports] Installing pkg-1.10.5_5... [ppcports] Extracting pkg-1.10.5_5: .......... done ===> mod_authnz_crowd-2.2.2_10 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of mod_authnz_crowd-2.2.2_10 =========================================================================== =================================================== =========================================================================== =================================================== ===> License APACHE20 accepted by the user => mod_authnz_crowd-2.2.2.tar.gz doesn't seem to exist in /portdistfiles/apache2. => Attempting to fetch http://downloads.atlassian.com/software/crowd/downloads/cwdapache/mod_authnz_crowd-2.2.2.tar.gz mod_authnz_crowd-2.2.2.tar.gz 30 kB 451 kBps 00s ===> Fetching all distfiles required by mod_authnz_crowd-2.2.2_10 for building =========================================================================== =================================================== ===> License APACHE20 accepted by the user ===> Fetching all distfiles required by mod_authnz_crowd-2.2.2_10 for building => SHA256 Checksum OK for apache2/mod_authnz_crowd-2.2.2.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> License APACHE20 accepted by the user ===> Fetching all distfiles required by mod_authnz_crowd-2.2.2_10 for building ===> Extracting for mod_authnz_crowd-2.2.2_10 => SHA256 Checksum OK for apache2/mod_authnz_crowd-2.2.2.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for mod_authnz_crowd-2.2.2_10 ===> Applying FreeBSD patches for mod_authnz_crowd-2.2.2_10 /usr/bin/sed -i.bak -e 's|@APXS_STAGE@|-S LIBEXECDIR=/wrkdirs/usr/ports/www/mod_authnz_crowd/work/stage/usr/local/libexec/apache24|' /wrkdirs/usr/ports/www/mod_authnz_crowd/work/mod_authnz_crowd-2.2.2/src/Makefile.am /usr/bin/sed -i.bak -e 's|%%APACHEETCDIR%%|etc/apache24|g' -e 's|%%APACHEINCLUDEDIR%%|include/apache24|g' -e 's|%%APACHEMODDIR%%|libexec/apache24|g' /wrkdirs/usr/ports/www/mod_authnz_crowd/work/mod_authnz_crowd-2.2.2/configure.ac =========================================================================== =================================================== ===> mod_authnz_crowd-2.2.2_10 depends on file: /usr/local/sbin/apxs - not found ===> Installing existing package /packages/All/apache24-2.4.39.txz [ppcports] Installing apache24-2.4.39... [ppcports] `-- Installing apr-1.6.5.1.6.1_1... [ppcports] | `-- Installing db5-5.3.28_7... [ppcports] | `-- Extracting db5-5.3.28_7: .......... done [ppcports] | `-- Installing expat-2.2.6_1... [ppcports] | `-- Extracting expat-2.2.6_1: .......... done [ppcports] | `-- Installing gdbm-1.18.1... [ppcports] | | `-- Installing gettext-runtime-0.19.8.1_2... [ppcports] | | `-- Installing indexinfo-0.3.1... [ppcports] | | `-- Extracting indexinfo-0.3.1: .... done [ppcports] | | `-- Extracting gettext-runtime-0.19.8.1_2: .......... done [ppcports] | | `-- Installing readline-7.0.5... [ppcports] | | `-- Extracting readline-7.0.5: .......... done [ppcports] | `-- Extracting gdbm-1.18.1: .......... done [ppcports] `-- Extracting apr-1.6.5.1.6.1_1: .......... done [ppcports] `-- Installing libnghttp2-1.37.0... [ppcports] | `-- Installing gcc8-8.3.0_1... [ppcports] | | `-- Installing binutils-2.32,1... [ppcports] | | `-- Extracting binutils-2.32,1: .......... done [ppcports] | | `-- Installing gmp-6.1.2_1... [ppcports] | | `-- Extracting gmp-6.1.2_1: .......... done [ppcports] | | `-- Installing mpc-1.1.0_2... [ppcports] | | `-- Installing mpfr-4.0.2... [ppcports] | | `-- Extracting mpfr-4.0.2: .......... done [ppcports] | | `-- Extracting mpc-1.1.0_2: ......... done [ppcports] | `-- Extracting gcc8-8.3.0_1: .......... done [ppcports] `-- Extracting libnghttp2-1.37.0: .......... done [ppcports] `-- Installing libxml2-2.9.8... [ppcports] `-- Extracting libxml2-2.9.8: .......... done [ppcports] `-- Installing pcre-8.43... [ppcports] `-- Extracting pcre-8.43: .......... done [ppcports] `-- Installing perl5-5.28.1_1... [ppcports] `-- Extracting perl5-5.28.1_1: .......... done ===> Creating groups. Using existing group 'www'. ===> Creating users Using existing user 'www'. [ppcports] Extracting apache24-2.4.39: .......... done Message from apr-1.6.5.1.6.1_1: /!\ ================================================================== /!\ The Apache Portable Runtime project removed support for FreeTDS with version 1.6. Users requiring MS-SQL connectivity must migrate configurations to use the added ODBC driver and FreeTDS' ODBC features. /!\ ================================================================== /!\ Message from gcc8-8.3.0_1: To ensure binaries built with this toolchain find appropriate versions of the necessary run-time libraries, you may want to link using -Wl,-rpath=/usr/local/lib/gcc8 For ports leveraging USE_GCC, USES=compiler, or USES=fortran this happens transparently. Message from perl5-5.28.1_1: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Message from apache24-2.4.39: To run apache www server from startup, add apache24_enable="yes" in your /etc/rc.conf. Extra options can be found in startup script. Your hostname must be resolvable using at least 1 mechanism in /etc/nsswitch.conf typically DNS or /etc/hosts or apache might have issues starting depending on the modules you are using. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - apache24 default build changed from static MPM to modular MPM - more modules are now enabled per default in the port - icons and error pages moved from WWWDIR to DATADIR If build with modular MPM and no MPM is activated in httpd.conf, then mpm_prefork will be activated as default MPM in etc/apache24/modules.d to keep compatibility with existing php/perl/python modules! Please compare the existing httpd.conf with httpd.conf.sample and merge missing modules/instructions into httpd.conf! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ===> mod_authnz_crowd-2.2.2_10 depends on file: /usr/local/sbin/apxs - found ===> Returning to build of mod_authnz_crowd-2.2.2_10 ===> mod_authnz_crowd-2.2.2_10 depends on package: autoconf>=2.69 - not found ===> Installing existing package /packages/All/autoconf-2.69_2.txz [ppcports] Installing autoconf-2.69_2... [ppcports] `-- Installing autoconf-wrapper-20131203... [ppcports] `-- Extracting autoconf-wrapper-20131203: .......... done [ppcports] `-- Installing m4-1.4.18_1,1... [ppcports] `-- Extracting m4-1.4.18_1,1: .......... done [ppcports] Extracting autoconf-2.69_2: .......... done ===> mod_authnz_crowd-2.2.2_10 depends on package: autoconf>=2.69 - found ===> Returning to build of mod_authnz_crowd-2.2.2_10 ===> mod_authnz_crowd-2.2.2_10 depends on package: automake>=1.16.1 - not found ===> Installing existing package /packages/All/automake-1.16.1_1.txz [ppcports] Installing automake-1.16.1_1... [ppcports] Extracting automake-1.16.1_1: .......... done ===> mod_authnz_crowd-2.2.2_10 depends on package: automake>=1.16.1 - found ===> Returning to build of mod_authnz_crowd-2.2.2_10 ===> mod_authnz_crowd-2.2.2_10 depends on executable: libtoolize - not found ===> Installing existing package /packages/All/libtool-2.4.6_1.txz [ppcports] Installing libtool-2.4.6_1... [ppcports] Extracting libtool-2.4.6_1: .......... done ===> mod_authnz_crowd-2.2.2_10 depends on executable: libtoolize - found ===> Returning to build of mod_authnz_crowd-2.2.2_10 =========================================================================== =================================================== ===> mod_authnz_crowd-2.2.2_10 depends on shared library: libsvn_client-1.so - not found ===> Installing existing package /packages/All/subversion-1.11.1_1.txz [ppcports] Installing subversion-1.11.1_1... [ppcports] `-- Installing liblz4-1.8.3,1... [ppcports] `-- Extracting liblz4-1.8.3,1: .......... done [ppcports] `-- Installing serf-1.3.9_3... [ppcports] `-- Extracting serf-1.3.9_3: .......... done [ppcports] `-- Installing sqlite3-3.27.1_1... [ppcports] `-- Extracting sqlite3-3.27.1_1: .......... done [ppcports] `-- Installing utf8proc-2.2.0... [ppcports] `-- Extracting utf8proc-2.2.0: .......... done [ppcports] Extracting subversion-1.11.1_1: .......... done ===> mod_authnz_crowd-2.2.2_10 depends on shared library: libsvn_client-1.so - found (/usr/local/lib/libsvn_client-1.so) ===> Returning to build of mod_authnz_crowd-2.2.2_10 ===> mod_authnz_crowd-2.2.2_10 depends on shared library: libcurl.so - not found ===> Installing existing package /packages/All/curl-7.64.1_1.txz [ppcports] Installing curl-7.64.1_1... [ppcports] `-- Installing ca_root_nss-3.43... [ppcports] `-- Extracting ca_root_nss-3.43: ........ done [ppcports] Extracting curl-7.64.1_1: .......... done Message from ca_root_nss-3.43: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** ===> mod_authnz_crowd-2.2.2_10 depends on shared library: libcurl.so - found (/usr/local/lib/libcurl.so) ===> Returning to build of mod_authnz_crowd-2.2.2_10 ===> mod_authnz_crowd-2.2.2_10 depends on shared library: libxml2.so - found (/usr/local/lib/libxml2.so) =========================================================================== =================================================== ===> Configuring for mod_authnz_crowd-2.2.2_10 libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:3: installing './ar-lib' configure.ac:3: installing './compile' configure.ac:5: installing './config.guess' configure.ac:5: installing './config.sub' configure.ac:2: installing './install-sh' configure.ac:2: installing './missing' src/Makefile.am: installing './depcomp' parallel-tests: installing './test-driver' configure: loading site script /usr/ports/Templates/config.site checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking for ar... ar checking the archiver (ar) interface... ar checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) gcc3 checking build system type... powerpc64-portbld-freebsd13.0 checking host system type... powerpc64-portbld-freebsd13.0 checking how to print strings... printf checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for fgrep... (cached) /usr/bin/fgrep checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/local/bin/nm -B checking the name lister (/usr/local/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... (cached) 262144 checking how to convert powerpc64-portbld-freebsd13.0 file names to powerpc64-portbld-freebsd13.0 format... func_convert_file_noop checking how to convert powerpc64-portbld-freebsd13.0 file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for archiver @FILE support... no checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/local/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcpp checking for ANSI C header files... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for dlfcn.h... (cached) yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... freebsd13.0 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for apr_pool_pre_cleanup_register in -lapr-1... yes checking for curl_global_init in -lcurl... yes checking for xmlFree in -lxml2... yes ./configure: CFLAGS+= -I/usr/local/include/libxml2 -I/usr/include: not found checking for /usr/local/include/apache24/httpd.h... yes checking for httpd... /usr/local/sbin/httpd checking for /usr/local/include/subversion-1/svn_client.h... yes checking for /usr/local/libexec/apache24/mod_dav.so... yes checking for /usr/local/etc/apache24/httpd.conf... yes checking for /usr/local/sbin/apxs... yes checking for /usr/local/sbin/apachectl... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating src/svn/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands =========================================================================== =================================================== ===> Building for mod_authnz_crowd-2.2.2_10 /usr/bin/make all-recursive Making all in src Making all in svn /bin/sh ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I/usr/local/include/apache24 `apr-1-config --cppflags --includes` -I/usr/local/include/subversion-1 `apr-1-config --cflags | sed -e 's/O[[:digit:]]/O1/'` -O2 -pipe -fno-strict-aliasing -MT mod_authz_svn_crowd.lo -MD -MP -MF .deps/mod_authz_svn_crowd.Tpo -c -o mod_authz_svn_crowd.lo mod_authz_svn_crowd.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -I/usr/local/include/apache24 -I/usr/local/include/apr-1 -I/usr/local/include/subversion-1 -O2 -pipe -fno-strict-aliasing -MT mod_authz_svn_crowd.lo -MD -MP -MF .deps/mod_authz_svn_crowd.Tpo -c mod_authz_svn_crowd.c -fPIC -DPIC -o .libs/mod_authz_svn_crowd.o mod_authz_svn_crowd.c: In function 'get_access_conf': mod_authz_svn_crowd.c:292: warning: 'svn_repos_authz_read' is deprecated (declared at /usr/local/include/subversion-1/svn_repos.h:4205) libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -I/usr/local/include/apache24 -I/usr/local/include/apr-1 -I/usr/local/include/subversion-1 -O2 -pipe -fno-strict-aliasing -MT mod_authz_svn_crowd.lo -MD -MP -MF .deps/mod_authz_svn_crowd.Tpo -c mod_authz_svn_crowd.c -o mod_authz_svn_crowd.o >/dev/null 2>&1 mv -f .deps/mod_authz_svn_crowd.Tpo .deps/mod_authz_svn_crowd.Plo /bin/sh ../../libtool --tag=CC --mode=link gcc `apr-1-config --cflags | sed -e 's/O[[:digit:]]/O1/'` -O2 -pipe -fno-strict-aliasing -module -o mod_authz_svn_crowd.la -rpath /usr/local/lib mod_authz_svn_crowd.lo -lcurl -lapr-1 -L/usr/local/lib libtool: link: gcc -shared -fPIC -DPIC .libs/mod_authz_svn_crowd.o -lcurl -lapr-1 -L/usr/local/lib -O2 -Wl,-soname -Wl,mod_authz_svn_crowd.so.0 -o .libs/mod_authz_svn_crowd.so.0.0.0 libtool: link: (cd ".libs" && rm -f "mod_authz_svn_crowd.so.0" && ln -s "mod_authz_svn_crowd.so.0.0.0" "mod_authz_svn_crowd.so.0") libtool: link: (cd ".libs" && rm -f "mod_authz_svn_crowd.so" && ln -s "mod_authz_svn_crowd.so.0.0.0" "mod_authz_svn_crowd.so") libtool: link: ar cru .libs/mod_authz_svn_crowd.a mod_authz_svn_crowd.o libtool: link: ranlib .libs/mod_authz_svn_crowd.a libtool: link: ( cd ".libs" && rm -f "mod_authz_svn_crowd.la" && ln -s "../mod_authz_svn_crowd.la" "mod_authz_svn_crowd.la" ) /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include/apache24 `apr-1-config --cppflags --includes` `xml2-config --cflags` `apr-1-config --cflags | sed -e 's/O[[:digit:]]/O1/'` -O2 -pipe -fno-strict-aliasing -MT mod_authnz_crowd.lo -MD -MP -MF .deps/mod_authnz_crowd.Tpo -c -o mod_authnz_crowd.lo mod_authnz_crowd.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include/apache24 -I/usr/local/include/apr-1 -I/usr/local/include/libxml2 -I/usr/include -O2 -pipe -fno-strict-aliasing -MT mod_authnz_crowd.lo -MD -MP -MF .deps/mod_authnz_crowd.Tpo -c mod_authnz_crowd.c -fPIC -DPIC -o .libs/mod_authnz_crowd.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include/apache24 -I/usr/local/include/apr-1 -I/usr/local/include/libxml2 -I/usr/include -O2 -pipe -fno-strict-aliasing -MT mod_authnz_crowd.lo -MD -MP -MF .deps/mod_authnz_crowd.Tpo -c mod_authnz_crowd.c -o mod_authnz_crowd.o >/dev/null 2>&1 mv -f .deps/mod_authnz_crowd.Tpo .deps/mod_authnz_crowd.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include/apache24 `apr-1-config --cppflags --includes` `xml2-config --cflags` `apr-1-config --cflags | sed -e 's/O[[:digit:]]/O1/'` -O2 -pipe -fno-strict-aliasing -MT crowd_client.lo -MD -MP -MF .deps/crowd_client.Tpo -c -o crowd_client.lo crowd_client.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include/apache24 -I/usr/local/include/apr-1 -I/usr/local/include/libxml2 -I/usr/include -O2 -pipe -fno-strict-aliasing -MT crowd_client.lo -MD -MP -MF .deps/crowd_client.Tpo -c crowd_client.c -fPIC -DPIC -o .libs/crowd_client.o crowd_client.c:13:23: error: curl/curl.h: No such file or directory crowd_client.c: In function 'crowd_init': crowd_client.c:75: error: 'CURL_GLOBAL_ALL' undeclared (first use in this function) crowd_client.c:75: error: (Each undeclared identifier is reported only once crowd_client.c:75: error: for each function it appears in.) crowd_client.c:75: error: 'CURLE_OK' undeclared (first use in this function) crowd_client.c: At top level: crowd_client.c:276: error: expected declaration specifiers or '...' before 'CURL' crowd_client.c: In function 'make_url': crowd_client.c:282: error: 'curl_easy' undeclared (first use in this function) crowd_client.c:282: warning: passing argument 2 of 'log_ralloc' makes pointer from integer without a cast crowd_client.c: At top level: crowd_client.c:296: warning: 'struct curl_slist' declared inside parameter list crowd_client.c:296: warning: its scope is only this definition or declaration, which is probably not what you want crowd_client.c: In function 'add_header': crowd_client.c:297: warning: passing argument 2 of 'log_ralloc' makes pointer from integer without a cast crowd_client.c: At top level: crowd_client.c:457: error: expected declaration specifiers or '...' before 'CURL' crowd_client.c: In function 'crowd_request': crowd_client.c:480: warning: passing argument 2 of 'add_header' from incompatible pointer type crowd_client.c:483: warning: passing argument 2 of 'add_header' from incompatible pointer type crowd_client.c:486: error: 'CURL' undeclared (first use in this function) crowd_client.c:486: error: 'curl_easy' undeclared (first use in this function) crowd_client.c:497: error: too many arguments to function 'make_url' crowd_client.c:511: error: 'CURLOPT_HEADERFUNCTION' undeclared (first use in this function) crowd_client.c:512: error: 'CURLOPT_WRITEHEADER' undeclared (first use in this function) crowd_client.c:513: error: 'CURLOPT_WRITEFUNCTION' undeclared (first use in this function) crowd_client.c:514: error: 'CURLOPT_WRITEDATA' undeclared (first use in this function) crowd_client.c:515: error: 'CURLOPT_URL' undeclared (first use in this function) crowd_client.c:520: error: 'CURLOPT_USERPWD' undeclared (first use in this function) crowd_client.c:522: error: 'CURLOPT_HTTPHEADER' undeclared (first use in this function) crowd_client.c:523: error: 'CURLOPT_TIMEOUT' undeclared (first use in this function) crowd_client.c:524: error: 'CURLOPT_SSL_VERIFYPEER' undeclared (first use in this function) crowd_client.c:525: error: 'CURLOPT_CAINFO' undeclared (first use in this function) crowd_client.c:526: error: 'CURLOPT_POST' undeclared (first use in this function) crowd_client.c:527: error: 'CURLOPT_READFUNCTION' undeclared (first use in this function) crowd_client.c:528: error: 'CURLOPT_READDATA' undeclared (first use in this function) crowd_client.c:529: error: 'CURLOPT_POSTFIELDSIZE' undeclared (first use in this function) crowd_client.c:536: error: 'CURLcode' undeclared (first use in this function) crowd_client.c:536: error: expected ';' before 'curl_code' crowd_client.c:537: error: 'curl_code' undeclared (first use in this function) crowd_client.c:537: error: 'CURLE_OK' undeclared (first use in this function) crowd_client.c: At top level: crowd_client.c:635: error: expected declaration specifiers or '...' before 'CURL' crowd_client.c: In function 'make_authenticate_url': crowd_client.c:638: error: 'curl_easy' undeclared (first use in this function) crowd_client.c:638: error: too many arguments to function 'make_url' crowd_client.c: At top level: crowd_client.c:712: error: expected declaration specifiers or '...' before 'CURL' crowd_client.c: In function 'make_create_session_url': crowd_client.c:714: error: 'curl_easy' undeclared (first use in this function) crowd_client.c:714: error: too many arguments to function 'make_url' crowd_client.c: At top level: crowd_client.c:847: error: expected declaration specifiers or '...' before 'CURL' crowd_client.c: In function 'make_validate_session_url': crowd_client.c:851: error: 'curl_easy' undeclared (first use in this function) crowd_client.c:851: error: too many arguments to function 'make_url' crowd_client.c:853: warning: initialization makes pointer from integer without a cast crowd_client.c: At top level: crowd_client.c:984: error: expected declaration specifiers or '...' before 'CURL' crowd_client.c: In function 'make_groups_url': crowd_client.c:993: error: 'curl_easy' undeclared (first use in this function) crowd_client.c:993: error: too many arguments to function 'make_url' crowd_client.c: At top level: crowd_client.c:1116: error: expected declaration specifiers or '...' before 'CURL' crowd_client.c: In function 'make_cookie_config_url': crowd_client.c:1118: error: 'curl_easy' undeclared (first use in this function) crowd_client.c:1118: error: too many arguments to function 'make_url' *** Error code 1 Stop. make[4]: stopped in /wrkdirs/usr/ports/www/mod_authnz_crowd/work/mod_authnz_crowd-2.2.2/src *** Error code 1 Stop. make[3]: stopped in /wrkdirs/usr/ports/www/mod_authnz_crowd/work/mod_authnz_crowd-2.2.2/src *** Error code 1 Stop. make[2]: stopped in /wrkdirs/usr/ports/www/mod_authnz_crowd/work/mod_authnz_crowd-2.2.2 *** Error code 1 Stop. make[1]: stopped in /wrkdirs/usr/ports/www/mod_authnz_crowd/work/mod_authnz_crowd-2.2.2 *** Error code 1 Stop. make: stopped in /usr/ports/www/mod_authnz_crowd =>> Cleaning up wrkdir ===> Cleaning for mod_authnz_crowd-2.2.2_10 build of www/mod_authnz_crowd | mod_authnz_crowd-2.2.2_10 ended at Fri Apr 12 03:17:18 UTC 2019 build time: 00:06:39 !!! build failure encountered !!!